Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Simplified

Problem

My device is not connected connecting to MobiControl even though it is on the WIFI networkpowered on and connected to a network.

Solution

  1. Unlock the deviceSee I want to unlock a device.
  2. Make sure that it the device has Internet access , e.g can browse a web pageto the internet.
  3. Open the "SOTI MobiControl"- app.Go to
  4. Under the "Device Configuration" page (can be found in the upper right menu)
    Image Removed"Agent Status" should be "Connected" - Device tab, check the Agent Status. It should say 'Connected', but since you are reading this article, it might be "Disconnected"
    Click on the "Agent Status" label - this will trigger the device to connect
  5. The Agent Status should change to "Connecting" or "Connected" 
  6. If "Connected": All is good
    If it is stuck "connecting", please verify these network prerequisites:
  7. Firewall port 5494 must be opened for outbound connections
  8. Mobicontrol Server has the IP address 40.68.196.181 and hostname ds1.mobi.taskletfactory.com and ds1.mob2.taskletfactory.com + 40.114.220.164 port 5494.say 'Disconnected'.

    Image Added

  9. If the status is 'Disconnected', tap once on the Agent Status. The status should change to 'Connected', which means the device has successfully reconnected.

    Info

    If the device is stuck on 'Connecting' please verify the network requirements:

    Network Requirements for MobiControl