...
This section outlines the steps required to perform a factory reset on a scanner.
There are two different approaches, one for manual factory reset and one specifically for Zebra devices.
Manual Factory Reset
You will need to go through the following steps (see pictures for reference):
...
The scanner is now ready to be enrolled in MobiControl, as described in the section below.
Zebra QR code factory reset
Zebra scanners have an app called “Stage Now” pre-installed on them.
...
The device will now be configured automatically, which takes around 5 minutes, during which it will play different sounds that might sound a bit strange, but this is intended, and the scanner should be left alone to finish.
Verification of Setup
Once the device is ready, you can verify the installation by performing the following steps:
...