Page Comparison

Description

Data uses for display

• Display lines
  • Item, Quantity etc. to process (See illustration)
• Line ordering
• Image

Data that modifies mobile operation

• Enable/disable Workflows steps
• Add custom steps
• Recognize barcodes and the quanity they represent

See also

• Order List GetOrders Response

Naming

Both "Register..." and "Validate..." means the same:

Should the value be collected by the mobile user.

• ValidateFromBin = False: The Bin-step will be skipped
• RegisterLotNumber = False: The Lotnumber-step will be skipped. Etc...

<?xml version="1.0" encoding="utf-16"?>
<response messageid="147db121-f664-4fb7-8d08-019ddf7405b1" status="Completed" xmlns="http://schemas.microsoft.com/Dynamics/Mobile/2007/04/Documents/Response">
  <description />
  <responseData>
     <registrationCollectorConfiguration>
	   <steps>
	     <add id="1" name="PackingSlip" inputType="Text" header="Packing slip" label="Packing slip" helpLabel="" length="20" eanAi="" />
	   </steps>
     </registrationCollectorConfiguration>     
     <BaseOrderLine xmlns="http://schemas.taskletfactory.com/MobileWMS/BaseDataModel">
       <OrderBackendID>RE000007</OrderBackendID>
       <LineNumber>10000</LineNumber>
       <ItemNumber>TF-003</ItemNumber>
       <Attachment>0</Attachment>
       <FromBin />
       <ToBin />
       <ValidateFromBin>false</ValidateFromBin>
       <ValidateToBin>false</ValidateToBin>
       <ItemNumber>1150</ItemNumber>
       <ItemBarcode>03661103036043;068U0439-03;08008203800764;1010154;12345678901231;2222555;3046920028752</ItemBarcode>
       <RegisterSerialNumber>false</RegisterSerialNumber>
       <RegisterLotNumber>false</RegisterLotNumber>
       <RegisterQuantityByScan>false</RegisterQuantityByScan>
       <RegisterExpirationDate>false</RegisterExpirationDate>
       <SerialNumber />
       <LotNumber />
       <Description>Front Hub</Description>
       <Quantity>100</Quantity>
       <RegisteredQuantity>0</RegisteredQuantity>
       <UnitOfMeasure>PCS</UnitOfMeasure>
       <Status>0</Status>
       <Sorting>0</Sorting>
       <DisplayLine1>1150</DisplayLine1>
       <DisplayLine2>Front Hub</DisplayLine2>
       <DisplayLine3>UoM: PCS</DisplayLine3>
       <DisplayLine4>Shipment: SH000005</DisplayLine4>
       <DisplayLine5 />
       <UnderDeliveryValidation>Warn</UnderDeliveryValidation>
       <OverDeliveryValidation>Warn</OverDeliveryValidation>
       <RegisterExpirationDate>false</RegisterExpirationDate>
       <AllowBinChange>true</AllowBinChange>
       <ItemImage>22-02-2021 15:23:03.077Item: TF-003</ItemImage>
       <ReferenceID>Warehouse Activity Line: Pick,PI000003,30000</ReferenceID>
       <Destination>SH000005</Destination>
       <Priority>0</Priority>
       <PriorityValidation>None</PriorityValidation>
       <!-- Optional -->
       <RewindToStepOnIncompleteLine>LotNumber</RewindToStepOnIncompleteLine>
       <BarcodeQuantity>PAPER1BOX{5}[Box];PAPER1PL{240}[Pallet]</BarcodeQuantity>
       <Workflow>
         <![CDATA[<registrationCollectorConfiguration>
           <steps>
             <add id="10" name="CustomTextField" inputType="text" header="Enter text" label="Enter custom text here" optional="false"  acceptBarcode="true" clearOnClear="true"/>
             <add id="20" name="CustomDecimalField"  inputType="decimal" header="Enter amount" label="Enter custom amount here" eanAi="30,37" optional="true"  acceptBarcode="true" clearOnClear="true" />
           </steps>
         </registrationCollectorConfiguration>]]>
       </Workflow> 
       <!-- End optional -->
    </BaseOrderLine>
  </responseData>
</response>

User cannot post orders with unfinished lines. This setting is useful if posting of an incomplete order will cause problems in other work processes. E.g. picking for a production order.

• RegisterSerialNumber [boolean]
  True:     The mobile user must scan the serial numbers of the items to handle. Each scan of increments the registered quantity by one.
  False:    A quantity can be entered directly.
• RegisterLotNumber [boolean]
  True:     The mobile user must first scan a lot number and then enter a quantity.              
  False:    A quantity can be entered directly.

• RegisterExpirationDate [boolean]
  This flag is used in combination with the RegisterLotNumber flag. If the lot is associated with an expiration date then this date can be captured on the mobile device by setting this flag.
  
  The mobile user is allowed to register the expiration date in the short date format of the current regional settings on the mobile device, but the date format on the registration is always:
  dd-MM-yyyy (e.g. 24-12-2009)
  
  True:     The mobile user must enter the expiration date after entering the lot number (before entering the quantity).
  False:    The user does not have to enter an expiration date
  
                         
• RegisterQuantityByScan
  
  
  • True:  The user must scan the item number / barcode to register a quantity. Every scan adds 1 to the total quantity. 
    This setting is used in scenarios where it is very important that the handled items are correct.
    An example of this is when picking medicine that does not use item tracking. Here the user must scan each individual packet / bag to verify that they match the ordered.
    
    
  • False: The user is allowed to enter a quantity.
    
    
• SerialNumber [string50]
  If the RegisterSerialNumber element is true and this element holds a value, the mobile application will verify that the user handles this particular serial number.
• LotNumber [string50]
  If the RegisterLotNumber element is true and this element holds a value, the mobile application will verify that the user handles this particular lot number.
• Quantity [decimal]
  The quantity to handle on the mobile device.
• RegisteredQuantity [decimal]
  Not used at the moment – always set this value to 0.
• UnitOfMeasure [string10]
  The unit of measure.
• Status [int]
  Not used at the moment – always set this value to 0.
• Sorting [int]
  When the order lines are displayed they are sorted by this column.
• DisplayLine1 [string100]
  This value is displayed on line 1 on the ”Order Lines” screen. The line is displayed in bold.
  
  
• DisplayLine2 [string100]
  This value is displayed on line 2 on the ”Order Lines” screen.
  
  
• DisplayLine3 [string100]
  This value is displayed on line 3 on the ”Order Lines” screen.
  UnderDeliveryValidation [string]
  This element determines how the application behaves when the user tries to post the order. It determines if the user will receive a warning or be blocked if an incomplete order is being posted. You can also turn off validation completely.Thevalid values are:
  None
  The order lines are not checked before posting.
  Warn
  The user is warned if incomplete lines are discovered. The user can ignore the warning and post anyway. This setting is useful as a check to see if the user has missed a line unintentionally.
  Block
  The user cannot post orders with unfinished lines. This setting is useful if posting of an incomplete order will cause problems in other work processes. E.g. picking for a production order.OverDeliveryValidation [string]
• This element determines how the application behaves when the user tries to register a greater quantity on an item than the Quantity element dictates. The valid values are:
• None 
  • The user is allowed to proceed with the over delivery without any interference.
• Warn 
  • The user is warned and asked whether to proceed when trying to register a quantity that exceeds the expected. This is to make sure the user is doing so intentionally.
BlockThe user is not allowed to proceed with the over delivery and a warning message is displayed.

• AllowBinChange [boolean]
  This flag determines if the user is allowed to register other bins / locations than specified by the ERP system.
  
  True:     The user is allowed to use other bin / locations. When another bin / location is scanned the          user will get a warning message, but he can ignore the warning and proceed with the                registration.
  
  False:    The user is not allowed to use other bins / location. When another bin / location is scanned          the user will get a message telling that changing bin / location is not allowed.