Register FromBin and ToBin (Movement flow)
Description
The movement flow forces the user to register an OrderLine two times separately (“FromBin” and “ToBin”).
Both using Collector Step Bin (To/From-Bin)
Use case
Used when each order line represents a movement from one bin to another.
Normally, a line is finished with only a single registration, but this flow takes two registrations to complete the line:
Register the FromBin and quantity taken
Register the ToBin and quantity placed
How to set it up
This flow is enabled when ValidateFromBin and ValidateToBin are both enabled on GetOrderLines response.
Limitations
Added steps will need to be registered twice - currently there is no way to only add steps to Take/Place
Step 1: Register FromBin (Take)
Before any registration. “From” has 0 of 20 registered.
Step 2: Register ToBin (Place)
“From” has 20 of 20 registered upon registering “Place”.
Afterwards, both have 20 of 20 and the line is now green.
Afterwards, both have 20 of 20 and the line is now green.