Description

Using encoded barcodes, you can register directly from the Order Lines .

Also known as "Single Scan Registration".

Requirements

You have to use Encoded barcodes that contains all information needed.

For example:

• Item
• Quantity
• Barcode (likely)
• Bin (optional)
• Lot no. (optional)
• Serial no. (optional)

You most likely need to enable Registering Quantity By Scan.

This will send a barcodes to the mobile app that represents quantity / units of measure.

Lot No. and Bin validation considerations

The following will prevent "Single Scan Registration"

• Registering Lot No.
• Validating Bin

This is because you cannot both have use Single Scan Registrations and

• ask the user to Validate the Bin.
• ask the user to validate Lot

Solution

You need to either

• send all the needed information to the mobile app 
• or disable the validation

So if you perform the following steps, Register Quantity By Scan will again be possible

1. Disable ValidateFromBin
2. Include LotNumber in the data sent to mobile app

 This feature is enabled by default in Android.

 Windows Handheld Embedded

In App.config

<singleScanRegistration>true</singleScanRegistration>

Example for Pick Lines.