Honeywell Scanner setup

Honeywell scanners does not use the wedge. However it is possible to change the behaviour of the scanner in the start.cfg file.

  <!-- SCANNER -->
  <scanner>
    <type>internal</type>
	...
     <scanEngineProperties>
      <scanEngineProperty key="key1" value="value1" />
      <scanEngineProperty key="key2" value="value2" />
    </scanEngineProperties>
  </scanner>

Finding and changing the scanner parameters

If a parameter should be changed then add the scanEngineProperty to the start.cfg.

E.g. if the "QR Code" should be enabled:

<scanEngineProperties>
    <scanEngineProperty key="DEC_QR_ENABLED" value="true" />
</scanEngineProperties>

Hint: this could also be: .... key="QrCodeEnabled" value="true" ...

To find the parameter to change the wedge settings can be used to see the different parameters and options:

Commonly used:

<scanEngineProperties>
  <scanEngineProperty key="Ean13CheckDigitTransmitEnabled" value="true" />  
</scanEngineProperties> 

here the code will translate the Ean13CheckDigitTransmitEnabled to DEC_EAN13_CHECK_DIGIT_TRANSMIT.

These are the setting keys:

BarcodeReader.SettingKeys:

BarcodeReader.SettingValues

http://download.salamandre.tm.fr/api/constant-values.html#com.honeywell.aidc.BarcodeReader.PROPERTY_CENTER_DECODE

Testing a scanner set up:

For testing purpose and to find out how to set up the scanner you can consider using "Scan demo" provided by Honeywell in the "Demos" app.