Versions Compared

Old Version 14

changes.mady.by.user Maria Jose Avila

Saved on

compared with

New Version 15

changes.mady.by.user Johannes Sebastian Nielsen

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • <add> 
    • id = "standard" - Name to reference from the service configuration through the workflowId attribute.
    • itemNumberAI = "01,02" - Defines the application identifiers used to identify a item when scanning a Gs1 barcode.
    • <configuration> -
      • prefillExpectedValueOnLocationScan = "false" - Set the expected value as the result when manual entry is selected by sliding the scan icon to the left.

      • scanBehaviourWhenRegisteringQuantity = "" - Defines what to do when scanning a barcode in the quantity step in the registration collector. 
        • ValidateCurrentItem - Validate the scanned item against the selected order line.
        • ScanNextItem - Accept the entered value, and look for a new order line to start registering values on.

      • fastForwardMode
        Fast forward is a feature for stepping over a step if a value is provided in either the input or scanned values. The fast forward mode determines which values can be used in the fast forward.
        Scanvalues = Barcode. Inputvalues = Values transferred from context from Order Lines. Default step-values are not considered.
        • OnlyScanValues
          • Only the values in the scan can be used for stepping over a step if the value is provided.
        • InputAndScanValues
          • Both the Input and scanned values can be used for stepping over a step if the value for the step is in the values. Input values are header values (filter) and properties from the selected item.

      • <steps> - Defines the order in which data will be collected.
        • <add> - Encloses the specific workflow steps.
          • id = "" -Sorting parameter for setting the order of the steps.
          • autoForwardAfterScan = "" - Dictates whether or not a step will move to the next when a scan is performed.
          • name = "" -  Key string for the collected piece of data, used in the transfer to the backend. Values which are treated specially are: ExpirationDate, FromBin, LotNumber, SerialNumber, ToBin, Tote and Quantity.
          • header = "" - Header text of the data collection step.
          • label = "" - Description above the input field.
          • helpLabel = "" - Description supporting the collection step, located below the input field.
          • inputFormat = "" - Used to make sure input follows a specific pattern, defined by a regular expression. See example How to make sure input follows a pattern example Validate input format in workflow step
          • inputType = "" - Defines which type of input collector control will be used and what the output will be. 
            • Date - Pick a date by a date picker. Returns a string with the format "dd-MM-yyyy".
            • DateTime - Pick a date time by a date picker and a time picker. Returns a string with the format "dd-MM-yyyy HH:mm:ss".
            • Decimal - Enter a decimal value. Supported by a numeric keyboard when no physical keyboard is present. Returns a decimal.
            • Image - Display an image placed on the device.
            • ImageCapture - Capture images by utilizing the onboard camera. Returns a list of image file names and comments, each separated by the listSeparator. Items i the list are separated by §. <filename1><listSeparator><comment1>§<filename2><listSeparator><comment2>... 
            • Information - Display information.
            • Integer - Enter an integer value. Supported by a numeric keyboard when no physical keyboard is present. Returns an integer.
            • List - Select a value from a list. Returns the selected list value as a string.
            • MultiLineText - Enter a longer description. Returns the entered string.
            • MultiScan - Scan multiple values of the same nature without moving on to register a new type of value. Returns a string of values separated by the chosen listSeparator.
            • QuantityByScan - Enter a quantity by scanning multiple items, incrementing by one on every successful scan. Can not be manually edited. Returns an integer.
            • RadioButton - Select a value from a short list of values. Returns a string.
            • Summary - Display all previously gathered values.
            • Text - Enter a short text. Returns a string.
          • primaryInputMethod = "Control" - Defines if the user is urged to enter values by keyboard or by scanning. Any input method can use the other by touching the scanning icon.
            • Control - Initially ready for manual entry. Scanning is still supported.
            • Scan -Initially ready for scanning a value. Manual entry can be done, by tapping the scan icon.
          • minDate = "01-01-0001" - The first accepted date.
          • minValue = "0" - The minimum value accepted.
          • maxDate = "31-12-9999" - The last accepted date.
          • maxValue = "int.MaxValue" - The largest value allowed.
          • dataTable = "" - Reference to a table in the reference data.
          • dataKeyColumn = "" - Reference to a column in the data table holding the values.
          • dataDisplayColumn = "" - Reference to the column which holds the displayable values.
          • linkedElement = "" - Link two steps, such that a selection on the first step is reflected on the linked step.
          • filterColumn = "" - The column to use when filter down selection possibilities. Filtering is done based on the selection made in the linkedElement.
          • listValues = "" - List of values defining the selectable items in a list.
          • listSeparator = ";" - Used to separate values when utilizing multi scan, and to separate values from listValues.
          • defaultValue = "" - Set a default value which is displayed as a guide to the user.
            • If empty, the field will be selected, ready for input
            • If prefillExpectedValueOnLocationScan is set to true, entering the manual entry mode the default value will be pre filled
          • optional = "false" - Defines if a step will accept an empty value.
          • eanAi = "" - When using a Gs1 barcode, this defines the application identifier used to get the value.
          • editable = "true" - Defines if a value is editable.
          • uniqueValues = "false" - Adds unique validation to the input when using multi scan.
          • visible = "true" - Defines if the this collection step is visible.
          • validationValues = "" - Values used to validate input in e.g. a string input field, a quantity by scan input field etc.
          • validationWarningType = "" - Which action to take when validation fails. 
            • Warn - Ask for permission if validation fails.
            • Block - Block further progress until validation is successful.
            • None - Accepts whether or not a value matches the default or not
          • validationCaseSensitive = "" - Is case to be taken into account when validation values.
          • performCalculation = "" - Allow calculation inside input area. Validation will still occur after calculation.
          • resolutionWidth = "" - The request width of an image when using ImageCapture.
          • resolutionHeight = "" - The requested height of an image when using ImageCapture.

...