Pick Order Lines
| Excerpt |
|---|
When a Pick order is selected from the list of orders available to process, information needed to process this one order is downloaded to the mobile device (assuming default Mobile WMS setup, see note in section 3.8). |
Downloading to the mobile device allows for goods movements to be processed in areas with poor or no wireless network coverage, e.g. inside a container, at remote outdoor locations, or other.
This screen shows the order lines for the selected order.
The main work process is:
- Scan one of the items to pick
- The corresponding order line is selected
- Register values on the order line
- Location
- Batch number
- Serial number
- Quantity
Selecting an order line
The fastest and most reliable way to select an order line is to scan the barcode of an item. If a barcode is not available or unreadable/damaged, you can manually double-tap an order line at the mobile touchscreen to start the registration process for that order line.
Entering location
If the storage dimension for the item is active in <Location> the mobile device will ask you to enter this information for the order line.
You must scan / enter the value before you can proceed. If you cannot scan a barcode to register the value it is possible to click the barcode symbol to enter the value manually.
In the standard configuration the mobile device will compare the registered location with the value suggested on the order line. If another value is entered the mobile device will display a warning message to you before the new value is used (this behavior can be changed between <None>, <Warn>, <Block>). See page See Application Config File – Validation for further in-depth information.