Use this event to

Add steps to be displayed at the mobile device when collecting values for each individual document line.

Description

New steps defined at line level (collected for each individual line) are merged with steps from your existing workflow defined in application.cfg

You may add custom steps using either the _Steps-parameter or a ConfigurationKey (to be declared in Reference Data).
Using the _Steps-parameter is the easiest and most flexible, but you may consider using a ConfigurationKey when performance or backwards compatibility with older Android Apps is more important to you.

Using _Steps-parameter	Using ConfigurationKey from ReferenceData
Easier syntax (Steps defined on-the-fly)	More difficult to use (requires ConfigurationKey in ReferenceData)
Multiple subscribers to same OnAddSteps event is possible	Only a single subscriber must exist to same OnAddSteps event
Performance cost per step added to order lines	No performance cost per additional step
_{Minimum requirements are Mobile WMS 5.39 and Android App 1.8}	_{Minimum requirement is Mobile WMS 5.11}

Template

[EventSubscriber(ObjectType::Codeunit, Codeunit::"MOB WMS Move", 'OnGetMoveOrderLines_OnAddStepsToWarehouseActivityLine', '', true, true)]
local procedure OnGetMoveOrderLines_OnAddStepsToWarehouseActivityLine(_WhseActivityLine: Record "Warehouse Activity Line"; var _BaseOrderLineElement: Record "MOB NS BaseDataModel Element"; var _Steps: Record "MOB Steps Element")
begin
end;

Example 1: Add line steps by using _Steps-parameter

// Prerequisites: Mobile WMS 5.39 and Android App 1.8
[EventSubscriber(ObjectType::Codeunit, Codeunit::"MOB WMS Move", 'OnGetMoveOrderLines_OnAddStepsToWarehouseActivityLine', '', true, true)]
local procedure My01OnGetMoveOrderLines_OnAddStepsToWarehouseActivityLine(_WhseActivityLine: Record "Warehouse Activity Line"; var _BaseOrderLineElement: Record "MOB NS BaseDataModel Element"; var _Steps: Record "MOB Steps Element")
begin
// if not (_BaseOrderLineElement.Get_UnitOfMeasure() in ['KG', 'GR']) then // Example: Condition based on input
// exit;

_Steps.Create_DecimalStep(10000, 'CustomGrossWeightGrams');
_Steps.Set_header('Gross Weight (Grams)');
_Steps.Set_label('Gross Weight (Grams):');
_Steps.Set_helpLabel('Gross Weight in Grams per Base Unit of Measure');
_Steps.Set_minValue(0);
_Steps.Set_maxValue(100000);
_Steps.Set_performCalculation(true);
end;

Example 2: Add line steps by referencing a ConfigurationKey from ReferenceData

Currently Mobile WMS supports only one (custom) referenced key per Order Line, meaning only one customization may create StepsByReferenceDataKey at any time. This single one subscriber must set a Key that includes all steps for all other intended subscribers as well. This can only be done by knowing other customizations are in place and manually create a new RegistrationCollectorConfigurationKey that includes all steps.

// Prerequisites: Mobile WMS 5.11
[EventSubscriber(ObjectType::Codeunit, Codeunit::"MOB WMS Move", 'OnGetMoveOrderLines_OnAddStepsToWarehouseActivityLine', '', true, true)]
local procedure My02OnGetMoveOrderLines_OnAddStepsToWarehouseActivityLine(_WhseActivityLine: Record "Warehouse Activity Line"; var _BaseOrderLineElement: Record "MOB NS BaseDataModel Element")
begin
_BaseOrderLineElement.Create_StepsByReferenceDataKey('CustomMoveSteps');

// Example: Modify attribute values for steps defined by the ReferenceDataKey used above (i.e. defaultValue)
// See: https://taskletfactory.atlassian.net/wiki/display/TFSK/How-to:+Modify+Custom+Line+Step+dynamically
end;

[EventSubscriber(ObjectType::Codeunit, Codeunit::"MOB WMS Reference Data", 'OnGetReferenceData_OnAddRegistrationCollectorConfigurations', '', true, true)]
local procedure My02OnGetReferenceData_OnAddRegistrationCollectorConfigurations(var _Steps: Record "MOB Steps Element")
begin
_Steps.InitConfigurationKey('CustomMoveSteps');

_Steps.Create_DecimalStep(20000, 'CustomNetWeightGrams');
_Steps.Set_header('Net Weight (Grams)');
_Steps.Set_label('Net Weight (Grams):');
_Steps.Set_helpLabel('Net Weight in Grams per Base Unit of Measure');
_Steps.Set_minValue(0);
_Steps.Set_maxValue(100000);
_Steps.Set_performCalculation(true);
end;

Sorting Steps for order lines

Steps are generally sorted by Id. This can be changed using the <orderLineConfiguration><extraInformationConfiguration stepSorting="ById"/><orderLineConfiguration/> in application.cfg

More examples

Page:

Case: Add Line Step (ExpirationDate) — Collect ExpirationDate in a custom text step.
Page:

How-to: Add Line Step — Add Steps to be displayed during a line registration on planned functions

Version History

Version	Changes
MOB5.11	Introduced
MOB5.39	New _Steps parameter introduced

Browser not supported