Use this event to

Populate values in Order Lines displayed at the mobile device (derived from any of four associated line tables). Parameters includes a RecRef-instance for the line table.

This event is executed after each of the following events has been executed already:

Template

    [EventSubscriber(ObjectType::Codeunit, Codeunit::"MOB WMS Receive", 'OnGetReceiveOrderLines_OnAfterSetFromAnyLine', '', true, true)]
    local procedure OnGetReceiveOrderLines_OnAfterSetFromAnyLine(_RecRef: RecordRef; var _BaseOrderLineElement: Record "MOB Ns BaseDataModel Element")
    begin
    end;

Example

    [EventSubscriber(ObjectType::Codeunit, Codeunit::"MOB WMS Receive", 'OnGetReceiveOrderLines_OnAfterSetFromAnyLine', '', true, true)]
    local procedure My01OnGetReceiveOrderLines_OnAfterSetFromAnyLine(_RecRef: RecordRef; var _BaseOrderLineElement: Record "MOB Ns BaseDataModel Element")
    var
        Item: Record Item;
    begin
        _BaseOrderLineElement.Set_DisplayLine2('Set from OnReceiveOnAfterSetFromAnyLine');

// Under-/OverDeliveryValidation - The choices are: None, Warn, Block
        _BaseOrderLineElement.Set_UnderDeliveryValidation('None');
        _BaseOrderLineElement.Set_OverDeliveryValidation('None');

        Item.Get(_BaseOrderLineElement.Get_ItemNumber());
        _BaseOrderLineElement.SetValue('SpecialEquimentCode', Item."Special Equipment Code");
    end;

Example: Sort lines by custom tag

[EventSubscriber(ObjectType::Codeunit, Codeunit::"MOB WMS Receive", 'OnGetReceiveOrderLines_OnAfterSetFromAnyLine', '', true, true)]
    local procedure My02OnGetReceiveOrderLines_OnAfterSetFromAnyLine(_RecRef: RecordRef; var _BaseOrderLineElement: Record "MOB Ns BaseDataModel Element")
    var
        Item: Record Item;
    begin
        // New custom tag
        Item.Get(_BaseOrderLineElement.Get_ItemNumber());
        _BaseOrderLineElement.SetValue('SpecialEquimentCode', Item."Special Equipment Code");

// Sort by custom tag
_BaseOrderLineElement.Set_Sorting1(_BaseOrderLineElement.GetValue('SpecialEquimentCode'));
end;

More examples

Page:

How-to: Modify DisplayLines — Additional text displayed on a List.
Page:

How-to: Register Quantity By Multiplication (enableMultiplier) — You want to scan the Quantity multiplier and then manually type the quantity to automatically calculate the total quantity to register.
The multiplers are defined by using the "Qty. per Unit of Measure" from the barcode "Unit of Measure" in the "Item Reference". See Barcode Quantity (enableMultiplier) Example: Box (5) x 10 = 50 Pcs
Page:

How-to: Register Quantity By Scan — You want to scan the Quantity . Either one piece or have the system calculate quantity based on "Item Cross Reference".
Page:

How-to: Sorting of Order Lines — Examples of sorting Order Lines.

Version History

Version	Changes
MOB5.00	Introduced

Browser not supported