Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Next »
<lists>
<!-- Orders -->
<listConfiguration id="Orders" columns="2">
<columns>
<column width="90%" xAlign="left" yAlign="top">
<elements>
<textElement fontId="headlineFont" text="{DisplayLine1}" />
<textElement fontId="contentFont" text="{DisplayLine2}" />
<textElement fontId="contentFont" text="{DisplayLine3}" />
<textElement fontId="contentFont" text="{DisplayLine4}" />
</elements>
</column>
<column width="10%" xAlign="right" yAlign="center" >
<elements>
<imageElement height="5%" width="5%" dataMember="Status" horizontalAlignment="right" verticalAlignment="bottom">
<values>
<value imageId="unlocked" dataMemberValue="1" />
<value imageId="locked" dataMemberValue="2" />
</values>
</imageElement>
</elements>
</column>
</columns>
</listConfiguration>
</lists>
- <listConfiguration>
- <columns>
- <column> - Overall configuration of a column.
- width = "" -Width of the column in %.
- xAlign = "" - Horizontal alignment of the content in the column. Allowed values are listed below.
- yAlign = "" - Vertical alignment of the content in the column. Allowed values are listed below.
- backgroundColor = "" - Background color for the column.
- <elements> - Encloses all the elements in the column.
- <imageElement>
- height = "" - Height is a percentage of the screen height (%-sign after number is optional).
- width = "" - Width is a percentage of the screen width (%-sign after number is optional).
- dataMember = "" - Reference to a value of the item displayed in the list. This value is used when using conditional image references through the values element.
- sourceId = "" - Reference to an id defined in the image reference section. Is disregarded when using dataMember and values references.
- horizontalAlignment = "" - Horizontal alignment of the image.
- verticalAlignment = "" - Vertical alignment of the image.
- <values>
- <value>
- imageId = "" - Reference to an id defined in the image reference section.
- dataMemberValue = "" - Reference to a valid value of the dataMember property of the item source. If the dataMember can return 1 and 2, then those are the valid values.