The Honeywell Granit 1980i is a cabled version, which connects through USB or a COM port.
1. Prerequisites
From version 1.5.3 Mobile WMS supports Honeywell Granit 1980i External scanners (referred to as the external device) along with the internal scanner.
2. Connecting the scanner
As this is a cabled scanner, connect it through the cable supplied with the scanner.
In the image below it is connected to a COM port on the Thor truck terminal.
Make sure it is enabled in the Honeywell settings app.
2.1. Configuration
The Aim prefix needs to be set up on the external device (a barcode must be scanned)
For the Mobile WMS application to work properly we need to set it up to prefix all barcodes with the AIM.
The AIM is three characters added to the barcode. E.g. ]C0 for a Code 128 barcode, ]D1 for a datamatrix and ]D2 for a GS1 datamatrix.
Here is a more detailed description: https://support.honeywellaidc.com/s/article/What-is-the-AIM-identifier-of-a-barcode
Scan this barcode to set up the prefix on the external scanner:
