Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 10 Next »

Collects

Any data.

Advantage

  • Can be added as a collector of Multiple items/entries.
    This is unique and very useful.

  • Save a value A and register several value B, keeping the association to Value A.


Typical use

Save Bin and register several Items and Quantities associated with that Bin.

Example

In this example, the standard Quantity Steps are disabled and replace with a TypeAndQuantity step.

Note how scanBehaviourWhenRegisteringQuantity is adjusted aswell.


<workflow id="countWorkflow" itemNumberAI="01,02">

        <!--<configuration scanBehaviourWhenRegisteringQuantity="ScanNextItem">-->
        <configuration scanBehaviourWhenRegisteringQuantity="ValidateCurrentItem">

          <steps>
            <add id="10" name="FromBin" inputType="Text" header="@{RegistrationCollectorFromBinHeader}" label="'{FromBin}'" defaultValue="{FromBin}" helpLabel="@{RegistrationCollectorFromBinHelpLabel}" eanAi="00" optional="false" primaryInputMethod="Scan"/>
            <add id="20" name="ToBin" inputType="Text" header="@{RegistrationCollectorToBinHeader}" label="'{ToBin}'" defaultValue="{ToBin}" helpLabel="@{RegistrationCollectorToBinHelpLabel}" eanAi="00" optional="false" primaryInputMethod="Scan" />
            <add id="31" name="ExpirationDate" inputType="Date" header="@{RegistrationCollectorExpirationDateHeader}" label="Expiration Date" optional="false" helpLabel="@{RegistrationCollectorExpirationDateHelpLabel}" eanAi="15,17,12"/>
            <add id="32" name="LotNumber" inputType="Text" header="@{RegistrationCollectorLotNumberHeader}" label="'{LotNumber}'" helpLabel="@{RegistrationCollectorLotNumberHelpLabel}" eanAi="10" optional="false" primaryInputMethod="Scan" defaultValue="{LotNumber}"/>
            <add id="35" name="ToteId" inputType="Text" header="@{RegistrationCollectorToteHeader}" label="" defaultValue="" helpLabel="@{RegistrationCollectorToteHelpLabel}" eanAi="98" optional="false" primaryInputMethod="Scan"/>
            <add id="40" name="SerialNumber" inputType="Text" header="@{RegistrationCollectorSerialNumberHeader}" label="{SerialNumber}" defaultValue="{SerialNumber}" helpLabel="@{RegistrationCollectorSerialNumberHelpLabel}" eanAi="21" optional="false" primaryInputMethod="Scan"/>            
            <!--<add id="50" name="Quantity" inputType="Decimal" header="@{RegistrationCollectorQuantityHeader}" label="" helpLabel="@{RegistrationCollectorQuantityHelpLabel}" optional="false" eanAi="310,30,37"/>-->
            <!--<add id="51" name="Quantity" inputType="QuantityByScan" header="@{RegistrationCollectorQuantityByScanHeader}" label="" helpLabel="@{RegistrationCollectorQuantityByScanHelpLabel}" optional="false"/>-->                      
            <typeAndQuantity scanBehavior="Add" id="91" name="Quantity2" header="@{RegistrationCollectorQuantityHeader}" label="" helpLabel="@{RegistrationCollectorQuantityHelpLabel}" optional="false" eanAi="310,30,37"/>          
          </steps>
        </configuration>
      </workflow>

Example 1:

Figure 1A - Bin Value is registered once (for the line)


Figure 1B - The usual Quantity step is replaced by a different type of Quantity step: In this "TypeAndQuantity"-step you may scan multiple different item numbers and different quantities for each item before leaving the step. 


Figure 1C - In the screenshot above a total 6 items was scanned for the line (two different item numbers).


Example 2:

The "TypeAndQuantity"-step can be used with i.e. Item Variants, too.

Figure 2A - Different items variants is registered for the line

  • No labels