Description
| Excerpt |
|---|
Set up and configure a new Zebra printer to be used with with Cloud Print Service |
Prerequisites
- Ensure that the The printer part number is supported: Supported Printers - Support Knowledge Base - Tasklet Factory Docsincluded on Supported printers
- The printer is powered on Loaded with Zebra branded label media. Preferably black mark media
- The printer is powered on
Step 1: Check part number of printer
Find the parts part number of underneath the printer underneath, it will be listed as either . Look for PCC or Part Number.
(see pictures below on where to find them)
Compare your printers part number with the once on the list here: Supported Printers in order to figure out Find your printer on Supported Printers to verify what capabilities your printer has.have.
Step 2: Set up network connection
For all printers with wiWi-fi capabilities Fi we recommend setting printers up using that. For the Industrial printers, we recommend setting them up for LAN usage.
From our experience you should olny use bluetooth if there is no other option as this solution is limited in reach compared to WiFi
Step 2: Set up Networking
The following guides will guide you through connecting the printer to a network:
Wired Printer Guide or Wireless Printer guide
If the printer is intended to be used with Bluetooth instead follow this guide:
After the printer has been connected to the network continue on to this article for Additional Zebra printer setupusing the wired LAN connection.
Please follow one of the these guides:
Use only Bluetooth if Wi-Fi is unavailable Bluetooth Printer Setup
Step 3: Configure ERP
Once the printer is set up, it is time to update the the ERP System, you will do this following the guides below:
- Business Central:
- See Printing
- NAV:
- See Tasklet University (Objects and Install Guide)
- AX/FO
Verify your setup by printing a couple of labels from the mobile device connected to the ERP System.