1. Prerequisites
Has to use the Scanner Edge application to work, It was previously called something else but in the newer Honeywell versions it is included as an App.
As explained here All Honeywell devices with Android 8 ++ have the scanner edge incorporated as a part of the in the Honeywell OS.
...
Overview
| Table of Contents | ||
|---|---|---|
|
1. Prerequisites
From version 1.5.1 Mobile WMS supports Honeywell Granit 1981i External scanners (referred to as the external device) along with the internal scanner.
There are a few prerequisites for using the setup, see sections below
| Table of Contents | ||
|---|---|---|
|
1.1. Honeywell devices with Android version from version 8 and forward (Scanner edge app)
Honeywell have See compatibility for devices here.
Honeywell has made an app named "Scanner Edge" that is used for connecting bluetooth Bluetooth scanners. In the next section, it is explained how to connect e.g. the Granit 1981i device.
The Scanner Edge app is a part of the Honeywell Android OS from Android version 8 and forward.
...
2 Connecting External Scanner to Honeywell Android device
2.1 Connection Setup
The Granit external device connects directly to the Android device via bluetoothBlueTooth. It only uses the cradle for charging.
...
Once set up the external device will automatically connect to the Android device again.
NB! It is important that you follow the third step in the setup
...
2.2 Configuration
The Aim prefix needs to be set up on the external device (a barcode must be scanned)
For the Mobile WMS application to work properly we need to set it up to prefix all barcodes with the AIM.
The AIM is three characters added to the barcode. E.g. ]C0 for a Code 128 barcode, ]D1 for a datamatrix, and ]D2 for a GS1 datamatrix.
Here is a more detailed description: https://support.honeywellaidc.com/s/article/What-is-the-AIM-identifier-of-a-barcode
Scan this barcode to set up the prefix on the external scanner:
Scan these two barcodes to strengthen the scanner connection.
A solution to this is to scan the following barcodes to enable auto-reconnect and set it to charge only.
2.3 Extra configurations
For further configurations for the handset, see the manual. E.g. how the handset should behave when placed in the Cradle. (Section: "Scan While in Base Cradle").
| View file | ||||
|---|---|---|---|---|
|