Description
| Excerpt |
|---|
Set up and configure a new Zebra printer to be used with with Cloud Print Service |
Prerequisites
- The printer is powered onpart number is included on Supported printers
- The printer Loaded with Zebra branded label media. Preferably black mark media
- The printer is powered on
Step 1: Check part number of printer
Find the parts part number of underneath the printer underneath, it will be listed as either . Look for PCC or Part Number.
(see pictures below on where to find them)
Compare your printers part number with the once on the list here: Supported Printers
For all printers with wi-fi capabilities we recommend setting printers up using that.
For the Industrial printers we recommend setting them up for LAN usage.
The mobile printers if the option is available we recommend setting them up for wi-fi and only use Bluetooth if there is no other option at the customer.
Step 2: Set up Networking
The following guides will guide you through connecting the printer to a network:
Wired Printer Guide or Wireless Printer guide
If the printer is intended to be used with Bluetooth instead follow this guide:
Bluetooth Printer SetupFind your printer on Supported Printers to verify what capabilities your printer have.
Step 2: Set up network connection
For printers with Wi-Fi we recommend that. Industrial printers, we recommend using the wired LAN connection.
Please follow one of the these guides:
Use only Bluetooth if Wi-Fi is unavailable Bluetooth Printer Setup
Step 3: Configure ERP
Once the printer is set up, it is time to update the the ERP System, you will do this following the guides below:
- Business Central:
- See Printing
- NAV:
- See Tasklet University (Objects and Install Guide)
- AX/FO
Verify your setup by printing a couple of labels from the mobile device connected to the ERP System.