Page Comparison

Description

Two

With this article you will create two pages that

will

can:

Show ("Display/look-up ") a list of entries entries using a Lookup Function
Make a registration regarding each entry on the list (An "Unplanned Item Registration")

Use case examples

the lookup entry using an Unplanned Function

Selecting a lookup entry will navigate to the unplanned function.

Use cases

You want to search for and display a list of outstanding "items" to "handle".
When you have handled each item, you want that item to disappear from the list and proceed to the next item.

or

You want to search for and display a list of Jobs.
Select one or more job and make registrations of Items or Hours etc. spent on that job.

How to use it

Overview

Table of Contents

maxLevel	3
exclude	Description\|Overview

Defining the pages in Application.cfg

Step 1: Defining the Lookup

Below is sample code for a Lookup called "MyLookup"

Code Block

language	vb
title	Add to application.cfg

<page id="MyLookup" type="Lookup" icon="mainmenuscaninfo">
  <title defaultValue="Titel"/>
  <lookupConfiguration type="MyLookup">
    <header configurationKey="MyLookup" automaticAcceptOnOpen="true" />
    <onResultSelected enabled="true" refreshOnSuccess="true" navigateTo="MyItemReg"/>
    <list listId="Lookup" />
  </lookupConfiguration>
  <actions>
    <open id="MyItemReg" icon="mainmenusettings" title="My UnplannedItemRegistration">
      <transfer property="LookupSelectedResult" to="UnplannedItemRegistrationInputValue"></transfer>
      <returnTransfer property="UnplannedItemRegistrationCompleted" to="RefreshOnResume"/>
    </open>
  </actions>
</page>

Step 2: Unplanned Item Registration

Below is sample code for an Unplanned Item Registration called "MyItemReg"

Code Block

language	vb
title	Add to application.cfg

<page id="MyItemReg" type="UnplannedItemRegistration" icon="mainmenuscaninfo">
  <title defaultValue="Titel"/>
  <unplannedItemRegistrationConfiguration type="MyItemReg" includeInputDataRowInSubmitRequest="true" useRegistrationCollector="true">
    <header configurationKey="MyItemReg" clearAfterPost="true" automaticAcceptOnOpen="true" automaticAcceptAfterLastScan="true"/>
    <onSuccessfulPost close="true" />
  </unplannedItemRegistrationConfiguration>
</page>

Please note

Note:

For simplicity the Page id, Registration key and Header Key -keys are all name the samenamed "MyItemReg".

Page id uniquely identifies the page in the config file unique page name
Registration key is how the back-end will identify the Unplanned Item Registration (including the Collector Steps)
Header key is how the back-end will identify the Input fields shown on the top of the page.
- See Header

Step 3: Add the main menu items

Code Block

language	vb
title	Add to application.cfg

<!-- PAGES -->
<pages>
  <page id="MainMenu" type="Menu" icon="icon">
    <title defaultValue="Mobile WMS" />
    <menuConfiguration>
      <menuItems>          
		...
        <menuItem id="MyLookup" displayName="MyLookup" icon="mainmenumove-unplanned" alwaysEnabled="true"/>
        <menuItem id="MyItemReg" displayName="MyItemReg" icon="mainmenushipping" alwaysEnabled="true"/>
        ...

Handling the back-end

Step 4: Defining a shared Header for the Pages

This will define the field(s) displayed on the top of the Lookup aka the search criteria.

But it will also enable the MyItemReg page to "Receive" this information.

So the header will be shared between the two pages.

For simplicity we will only have a field called "ID".

This is defined in Codeunit "MOB WMS Reference Data"

Code Block
CreateConfig(XMLResponseData,'MyLookup'); CreateConfig(XMLResponseData,'MyItemReg');

Code Block
'MyLookup','MyItemReg': MyLookupAndMyItemReg(XMLCDataSection);

Code Block

MyLookupAndMyItemReg(VAR XmlCDataSection : DotNet "System.Xml.XmlCDataSection")
// Used for Custom05UnplannedItemReg

AddConfHeaderTextValue(XmlCDataSection,
                       1,                 //id
                       'ID',              //name
                       'Enter ID:',       //label
                       100,               //label width
                       TRUE,              //clear on clear
                       TRUE,              //accept barcode
                       20,                //length
                       TRUE,              //optional
                       '',                //search type
                       '',                //eanAi
                       FALSE);            //locked

Step 5: Handling the Request for Lookup

This is the code that will return the list of results and entries that you require.

We will have some dummy Line data.

This is defined in Codeunit "MOB WMS Lookup"

Code Block

LOCAL MyLookup(XMLRequestDoc : DotNet "System.Xml.XmlDocument")

// The parameters are located in the <requestData> element
MobXMLMgt.GetDocRootNode(XMLRequestDoc, XMLRequestNode);
MobXMLMgt.FindNode(XMLRequestNode, 'requestData', XMLRequestDataNode);

// Read the header field value of field "ID" 
MobXMLMgt.FindNode(XMLRequestDataNode, 'ID', XMLParameterNode);   // <---- Use the read values for your further logic...

// Initialize the response XML
MobBaseToolbox.InitializeResponseDocWithNS(XMLResultDoc, XMLResponseData, 'http://schemas.taskletfactory.com/MobileWMS/WarehouseInquiryDataModel');

// Create response values

REPEAT // <----- Create logic to generate lookup result
   MobXMLMgt.AddElement(XMLResponseData, 'LookupResponse', '', MobXMLMgt.GetNodeNSURI(XMLResponseData), XMLLookupResponse);

  // Add the data elements to the <LookupResponse> element
  MobXMLMgt.AddElement(XMLLookupResponse, 'Location', 'Location xxx', MobXMLMgt.GetNodeNSURI(XMLResponseData), XMLCreatedNode);
  MobXMLMgt.AddElement(XMLLookupResponse, 'ID', 'LinkLookupToReg', MobXMLMgt.GetNodeNSURI(XMLResponseData), XMLCreatedNode);
  MobXMLMgt.AddElement(XMLLookupResponse, 'DisplayLine1', 'Line 1', MobXMLMgt.GetNodeNSURI(XMLResponseData), XMLCreatedNode);
  MobXMLMgt.AddElement(XMLLookupResponse, 'DisplayLine2', 'Line 2', MobXMLMgt.GetNodeNSURI(XMLResponseData), XMLCreatedNode);
  MobXMLMgt.AddElement(XMLLookupResponse, 'DisplayLine3', 'Line 3', MobXMLMgt.GetNodeNSURI(XMLResponseData), XMLCreatedNode);
  MobXMLMgt.AddElement(XMLLookupResponse, 'DisplayLine4', 'Line 4', MobXMLMgt.GetNodeNSURI(XMLResponseData), XMLCreatedNode);
  MobXMLMgt.AddElement(XMLLookupResponse, 'DisplayLine5', 'Line 5', MobXMLMgt.GetNodeNSURI(XMLResponseData), XMLCreatedNode);
  MobXMLMgt.AddElement(XMLLookupResponse, 'ExtraInfo1', '', MobXMLMgt.GetNodeNSURI(XMLResponseData), XMLCreatedNode);
  MobXMLMgt.AddElement(XMLLookupResponse, 'ExtraInfo2', '', MobXMLMgt.GetNodeNSURI(XMLResponseData), XMLCreatedNode);
  MobXMLMgt.AddElement(XMLLookupResponse, 'ExtraInfo3', '', MobXMLMgt.GetNodeNSURI(XMLResponseData), XMLCreatedNode);

  Int += 1;
UNTIL Int = 3;

Step 6: Defining the "Steps" to collect

This is the code that will return the list of results and entries that you require.

This is defined in Codeunit "MOB WMS Adhoc Regstr."

Code Block
'MyItemReg': BEGIN MyItemReg(XMLRequestDoc); END;

Code Block

LOCAL MyItemReg(XMLRequestDoc : DotNet "System.Xml.XmlDocument")
// Extract any parameters from the XML
// The parameters are located in the <requestData> element
// The Unplanned Move feature expects 2 header values
// Location and Item
MobXMLMgt.GetDocRootNode(XMLRequestDoc, XMLRequestNode);
MobXMLMgt.FindNode(XMLRequestNode,MobWMSToolbox."CONST::requestData",XMLRequestDataNode);

// -- Now find the "ID"-attribute
MobXMLMgt.FindNode(XMLRequestDataNode,'ID',XMLParameterNode);

// Initialize the response xml
MobBaseToolbox.InitializeRespDocWithoutNS(XMLResultDoc,XMLResponseData);

// Add the <registrationCollectorConfiguration> element
MobXMLMgt.AddElement(XMLResponseData,'registrationCollectorConfiguration','',
                     MobXMLMgt.GetDocNSURI(XMLResultDoc),
                     XMLRegCollectorConfiguration);

// Add the <steps> element to the <registrationCollectorConfiguration>
MobXMLMgt.AddElement(XMLRegCollectorConfiguration,'steps','',MobXMLMgt.GetDocNSURI(XMLResultDoc),XMLSteps);

// Add the steps
MobConfTools.RC_Std_Parms(1,
                          'SomeText',
                          'Collecting some text',
                          '',
                          'Please enter some text');

MobConfTools.RC_Text_XmlNode(XMLSteps,
                             '',
                             20);

This will produce one collector step.

Asking for a text value.

Step 7: Handling the "posting" of Unplanned Item Registration

This code read the collected data and posts it.

If this code makes changes to the data the Lookup uses, you will see the result of the posting when the returning to the Lookup.

This is defined in Codeunit "MOB WMS Adhoc Regstr."

Code Block
'MyItemReg': BEGIN Status := PostMyItemReg(XMLRequestDoc); MobBaseToolbox.CreateSimpleResponse(XMLResultDoc,Status); END;

Create function "PostMyItemReg" by copying an existing posting function.

Modify the new function to read the "ID" and "SomeText" values.

The lookup

The Unplanned Item Registration

Versions Compared

Old Version 16

New Version Current

Key

Description

Use cases

Overview

Defining the pages in Application.cfg

Step 1: Defining the Lookup

Step 2: Unplanned Item Registration

Step 3: Add the main menu items

Handling the back-end

Step 4: Defining a shared Header for the Pages

Step 5: Handling the Request for Lookup

Step 6: Defining the "Steps" to collect

Step 7: Handling the "posting" of Unplanned Item Registration