Page Comparison

Description

Prerequisites

• The printer is powered onpart number is included on Supported printers
• The printer Loaded with Zebra branded label media. Preferably black mark media
• The printer is powered on

Step 1:

The following guides will guide you through connecting the printer to a network:

Wired Printer Guide or Wireless Printer guide

If the printer is intended to be used with Bluetooth instead follow this guide:

Check part number of printer

Find the part number underneath the printer. Look for PCC or Part Number.

Find your printer on Supported Printers to verify what capabilities your printer have.

Image AddedImage Added

Step 2: Set

The printer must be set to use "ZPL" language

Go to devices Language in the Zebra Print utility app

Image Removed

Set printer to XML and ZPL under Set Device Language.

Image Removed

Step 3: Set Printer media settings

The printer must be set to use the relevant media, either Black mark/"Bar" or "Gap".

 In the Zebra Print utility app go to media settings:

Image Removed

To modify the settings tap on Media Settings

Image Removed

Set the width and length of the label and make sure it is set to label/tag

Image Removed

Set the Media Type to what matches the media being used and set Media Handling to tear off

Image Removed

after this hit apply and the printer will then restart.

Step 4: Further adjustment

Horizontal alignment

Vertical alignment

If there is any issues with the print quality then you can adjust the speed if the print is streaky and darkness if the print is faded.

Both Speed and Darkness can be set trough the Zebra Print utility app, go to "Print Quality".

Image Removed

From here you can either choose to manually adjust or use the apps assistant.

Image Removed

In manual adjust you can set the values yourself and find the right settings with the print sample label.

Image Removed

up network connection

For printers with Wi-Fi we recommend that. Industrial printers, we recommend using the wired LAN connection.

Please follow one of the these guides:

• Wireless Printer guide
• Wired Printer guide

Use only Bluetooth if Wi-Fi is unavailable Bluetooth Printer Setup

Step 3: Configure ERP

Once the printer is set up, it is time to update the the ERP System, you will do this following the guides below:

• Business Central:
  • See Printing
• NAV:
  • See Tasklet University (Objects and Install Guide)
• AX/FO
  • Mobile WMS Label Print (AX/FO)

Verify your setup by printing a couple of labels from the mobile device connected to the ERP System.

Troubleshooting

• Zebra Printer Troubleshooting 
• Troubleshoot Zebra printer - Support Knowledge Base - Tasklet Factory Docs