...
| Table of Contents | ||
|---|---|---|
|
| Supported ringscanner devices |
|---|
| RS5100 |
| RS6000 |
RS6100 |
The Bluetooth ringscanner is unfortunately not supported by Zebra's pairing software.
In order to make the ringscanner pair with a Zebra device, the following procedure needs to be done.
...
- Reboot the scanner by holding the Restore Key down for three seconds, and releasing it.
- Reboot the device.
- Finally Pair the Device Using the Pairing app on the device.
- Once the ringscanner RS5100 is connected open the DataWedge app
- Select the Mobile WMS profile
- Go to: Configure scanner settings
- Select Scan params
- Select Code Id Type
- This must be set to "Aim".
...