Description
| Excerpt |
|---|
Set up and configure a new Zebra printer to be used with Cloud Print Service |
Prerequisites
- The printer is powered on
- Loaded with Zebra branded label media
- Preferably black mark media
Step 1: Check part number of printer
Find the parts number of the printer underneath, it will be listed as either PCC or Part Number.
(see pictures below on where to find them)
Compare your printers part number with the once on the list here: Supported Printers
For all printers with wi-fi capabilities we recommend setting printers up using that.
For the Industrial printers we recommend setting them up for LAN usage.
The mobile printers if the option is available we recommend setting them up for wi-fi and only use Bluetooth if there is no other option at the customer.
Step 2: Set up Networking
The following guides will guide you through connecting the printer to a network:
Wired Printer Guide or Wireless Printer guide
If the printer is intended to be used with Bluetooth instead follow this guide:
After the printer has been connected to the network continue on to this article for Additional Zebra printer setup